Jeep Wrangler JLU FULL ROOF RACK, ALUMINUM

EVO MFG
EVO-3168AL
$1,900.00
$1,900.00

EVO MFG JLU Unlimited Full Roof Rack, Aluminum

The EVO MFG JLU Unlimited Full Roof Rack is a versatile, no drilling or cutting, easy to install roof rack. Slim low profile design, tight roof connections and sloping faces all contribute to the clean appearance and low wind noise. Simple drip rail mounting allows for installation by even the most novice installer. It requires no drilling or permanent modifications of the hardtop leaving no chance of water damage and see page into the interior compartment. Full length side plates and metal core rubber isolation efficiently distribute all loads and create an isolated quiet and cushioned operation. Flat upper platform gives unlimited options for carrying capacity and 7 T-Slot left to right crossbars offer optimal locating of tie down positions fitting most accessories mount like bike mounts etc. The EVO MFG JLU Unlimited Full Roof Rack is Laser Cut and CNC Press Brake formed from steel. Simple installation with standard tools and supplied hardware. Fits JLU with standard hardtop.

Platform dimensions 80" x 55" (front to back) x (left to right). Low profile design only extends less than 3" above roof crown.

Light bar option: Includes brackets to mount most 50" light bars. Light bar shown is a Baja Designs OnX Straight. OPTIONAL WITH OR WITHOUT LIGHT BAR.

With Light Bar Option is light bar only.

Additional wiring harness and other associated items may be needed to complete installation on your vehicle's setup.  Wiring Harness is not included with any option from EVO.

If using T Slots, hardware should use or adapt to ~5/8" Base width.

Note: This rack has a distributed dynamic load rating of 70kg / 154lbs.
It is advised to not carry items at high speeds that can create lift (upward force to due to wind) such as but not limited to kayaks, surfboards etc.

Powdercoated Racks are offered as a convenience. We do not cover finish/powdercoating under warranty. All our bumper/tire Carrier/rack products are also available in raw metal for local treatment specific to your area needs.

 

 

Read More
Read Less

INSTALLATION INSTRUCTIONS

EVO-3038-EVO-3038B.pdf

All Products Manufactured by EVO Manufacturing shall have a Limited Lifetime Warranty on defects in material and craftsmanship.

All products must be on the original vehicle it was installed on by the original purchaser and is not transferable

Proof of purchase is required for all warranty claims

EVO Manufacturing is not responsible for any labor charges, shipping charges and other costs in result of a warranty claim of any EVO Manufacturing product

EVO Manufacturing is not responsible for any and all costs associated with incidental and consequential damages and are excluded under this warranty, regardless of when, where or why the warranty occurs

All EVO Manufacturing products must be deemed to be installed correctly, unaltered, free from abuse and combined with other appropriate equipment/products/components.

All return/warranty products must be recieved in new, unused, unmodified, undamaged condition to qualify for credit. 

Exceptions to stated warranty:

Wearable items are not included in warranty.  These products include but are not limited to tie rod ends, draglinks, bushings, bump stops, bearings, heim joints, uniballs/spherical bearings etc. and hardware

Any substitution of other manufactures components or exemption of required and or supplied components will immediately void all warranties.

EVO Manufacturing does not warranty any product not manufactured by EVO Manufacturing.

EVO Manufacturing warranty applies to only products purchased, sold, installed and remaining in the United States of America.

All product finishes provided are warranted to be free from defects at time of sale only.

Springs and Shocks are warrantied against manufacturing defects only and are only returnable if they have not been installed on a vehicle.

EVO Manufacturing products that are used for competition and or racing immediately void all warranties.

EVO Manufacturing recommends the installation of EVO MFG products be installed by certified technicians only.

EVO Manufacturing is not responsible or liable for any loss, damage, injury whether consequential, ordinary, direct, special or incidental arising from the manufacture, sale, resale, installation, delivery, possession, handling and or use of its products.

Electronic components and products provided by EVO MFG will have a 90 Day Warranty and must be deemed free if any tampering or accidental damages or abuse.

EVO Manufacturing is not responsible for any typographical errors in either pricing or content related to all EVO Manufacturing related products, items, websites, packaging, instructions etc.

 

Disclaimers:

Warranties: EVO Mfg. disclaims any other warranties, whether express or implied, beyond those set out in the above-entitled “Warranties” provision. Warranties specifically disclaimed include but are not limited to any implied warranties, any warranty of suitability, any warranty of merchantability, or any warranty of fitness for a particular purpose.

Consequential Damages: EVO Mfg. will not be responsible for damages resulting in negligence, alteration, accident or use for which the part was not approved by the manufacturer or EVO. EVO will not be responsible for loss time, inconvenience, loss of use of a vehicle or any other consequential damages, or labor for removal from the vehicle and reinstallation (if any) or any part or merchandise.

 

Shipping:

We ship our parts anywhere in the world.  Due to varying shipping rates, taxes and duties we require all orders to be placed through email (sales@evomfg.com) or phone calls (310.761.9588) to better assist you, the customer, in receiving the most accurate and cheapest shipping rates.  

Please allow one business day for order processing. The majority of orders are shipped immediately if your item is in stock and available. You will receive an email notification within 2 business days, notifying you that your item(s) has shipped. If your item is currently not in stock, it will have to be made to order which may take up to 8 weeks. In such instances you will be contacted via email by Customer Service. 

Terms of sale: All products shipped FOB EVO MFG and the buyer assumes all risk of damage or loss.
Insurance is available through the carrier at an additional charge. Signature required is available upon request.

Please note because we are located in Southern California all orders shipping to locations within Southern California usually arrive the next business day via Fedex or UPS Ground.

For orders shipping outside the US, please email sales@evomfg.com for shipping options.

Damaged or Missing Items:  


Please verify that all contents shown on the bill of materials located on the instructions are free from damage or defects.

EVO MFG will not be held resposible for missing or damaged items caused by shipping or packaging.

EVO MFG must be notified if you have missing or damaged items within 7 days after delivery date. Contact 310.761.9588

FITMENT VERIFICATION:

All raw products should be checked for defects and for proper fitment prioir to powdercoating or painting. Incorrect items or defects must be brought to the attention of EVO MFG prior to powdercoating or painting.

EVO MFG is not responsible for cost associated with powdercoating or painting of parts that were not previously verified.  

Sales Tax
For all orders shipped within California, there will be an 8.00% sales tax automatically calculated and added to your order total at time of checkout. Orders shipping to all other states will be exempt from sales tax.

Cancelling or Changing Orders
Orders can not be cancelled once you have completed the checkout process. However, we will do our best to accommodate you if you need to make any changes. Please contact Customer Service as soon as possible.

Your cart

×