COMBINE STEERING PRODUCTS TO IMPROVE STEERING FEEL ON ROAD AND OFF ROAD STRENGTH, AS YOU SEE FIT.
EVO 2.5 Ton HD Steering Kit is the ultimate steering upgrade for your Jeep Wrangler JL or Gladiator JT. Designed to replace your weak stock components, this kit gives you the strength and precision you need to tackle large tires and aggressive off-roading.
Use to correct often vague, sloppy stock steering wobble.
Unmatched Strength: Made from massive 2-inch diameter, 7075-T6 aluminum, the tie rod and draglink are engineered to be incredibly strong yet lightweight. This "memory" alloy can flex under extreme stress and return to its original shape, so you don't have to worry about bending your steering on the trail.
Improved Steering Feel: Experience a dramatic improvement in steering precision and feedback. The beefy design eliminates the flex found in factory steering components, giving you a more direct and connected feel, whether you're rock crawling or cruising down the highway.
Simple Adjustments: Our unique design allows you to adjust the length of the tie rod and draglink by simply rotating the bar, making alignment adjustments a breeze.
Complete Kit: This kit includes everything you need for a full steering overhaul, including the 7075-T6 aluminum draglink and tie rod, oversized tie rod ends, and all necessary hardware.
Versatile Fitment: The draglink can be installed in a standard "under mount" position or in a "top mount" (flipped) configuration for even better clearance and steering geometry. Note: Brackets for a flipped draglink are sold separately.
Wheel Backspacing: To ensure proper clearance, you must have wheels with 4.75" of backspacing or less. Factory wheels will require wheel spacers.
Steering Stabilizer: This kit requires a steering stabilizer relocation, and the necessary hardware is not included. Be sure to purchase the appropriate parts for your setup. EVO-3173 is an option
Axle Width: This specific kit is designed for factory wide axle vehicles (common on most JL/JT models). If your tie rod measures over 60" from center stud to center stud, this is the correct kit for you.
Upgrade your Jeep with the EVO MFG 2.5 Ton HD Steering Kit.
Surface finish/Powder coat option available on aluminum bars. This processing may have a lead-time.
EVO Sector Shaft Brace for Jeep Wrangler JL/JLU (2018+) and Gladiator JT (2020+) (SKU: EVO‑3183B). Designed to combat steering slack and frame warping, this new brace empowers serious off-roaders with improved control and confidence.
The Sector Shaft Brace with Track Bar Reinforcement helps alleviate the flex in the steering gearbox when cycling the steering system from side to side while also reinforcing the frame side track bar mount to ensure that mount does not rip off under extreme conditions. It will increase steering feel and reduce play in steering system/box.
🔧 Key Features & Benefits
Backed by EVO MFG’s limited lifetime warranty on manufacturing defects, the Sector Shaft Brace ensures long-term performance. (See warranty policy for details
Control jarring feedback from rough roads and oversized tires with the King Shocks Steering Stabilizer, exclusively tuned by EVO Manufacturing. This high-performance upgrade designed to give you superior steering control and confidence on and off the trail.
This stabilizer is engineered to make driving experience smoother, more predictable, and less fatiguing.
King Shocks Performance: Built with the legendary quality of King Shocks, this stabilizer features race-proven technology, including a 2.0-inch diameter body and a 3/4-inch shaft, for exceptional durability and damping. It's designed to outlast and outperform standard steering stabilizers.
Custom EVO Tuning: Each stabilizer is custom-tuned by EVO Manufacturing to perfectly complement the steering dynamics of the Jeep Wrangler JL and Gladiator JT. This tuning ensures optimal performance, providing a firm, responsive feel without being harsh.
Bolt-On Installation: Designed for a straightforward installation, bolt-on mounting that fits with your factory steering components. No welding or complicated modifications are needed.
Eliminate Steering Wander & Fatigue: By effectively dampening unwanted steering feedback, this stabilizer significantly reduces bump steer feel, steering wheel shake, and the constant micro-corrections needed on uneven terrain. The result is a more stable, comfortable, and less fatiguing ride.
Corrosion-Resistant Finish: Featuring a durable zinc corrosion-resistant finish, the stabilizer is built to withstand of off-roading, keeping it looking and performing great.
Vehicle Compatibility: This product is a direct bolt-on solution for all Jeep Wrangler JL and Gladiator JT models
JL/JT Wrangler Gladiator Front Track Bar Steering Correction
Front Track bar Steering Correction is a simple to install and effective steering upgrade for the 2018+ Jeep Wrangler JL and 2020+ Jeep Gladiator.
Primary steering focus on a solid axle vehicle like the Wrangler and Gladiator, is that the suspension arms called, draglink and trackbar, be in parallel at ride height. During lifting they become increasing out of parallel. This is the most significant cause of poor steering feel of lifted Jeeps and what is commonly referred to as bump steer.
When installed on 2.5"+ lifted Jeep, this bracket kit will correct draglink and trackbar angles realigning them to parallel and therefore reducing bump steer through the suspension travel.
This product offers 2 track bar mounting locations, both in parallel to draglink. The first mounting location will recenter the axle alignment using a stock track bar giving a cost-effective solution to recenter axle after lifting without the need of an adjustable trackbar and will reduce bump steer by making the draglink and track bar parallel.
The second ideal extended mounting location (require the use of an adjustable track bar in combination) will center your Jeeps axle and additionally increase the overall track bar length reducing the differential between the draglink and trackbar lengths, further reducing bump steer by an additional 20%.
With reduced bump steer, the driver will obtain improved steering feel and reduce steering push/pull forces that are attributed to steering wobble.
Lastly the included kit raises the track bar at the axle to achieve realignment, in doing so the vehicles roll center is also improved yielding less body roll vs turning force.
INSTALLATION TIME 1-2 HOURS. Bolt on installation with 2 small drilled holes.
This product is compatible with all JL/JT EVO MFG lift kits, excluding our EVO Double Throwdown Systems.
Compatible Models: All Models including, Sport, Mojave, Rubicon, 4xE, Willys, Sahara, Freedom, High Altitude
All Products Manufactured by EVO Manufacturing shall have a Limited Lifetime Warranty on defects in material and craftsmanship.
All products must be on the original vehicle it was installed on by the original purchaser and is not transferable
Proof of purchase is required for all warranty claims
EVO Manufacturing is not responsible for any labor charges, shipping charges and other costs in result of a warranty claim of any EVO Manufacturing product
EVO Manufacturing is not responsible for any and all costs associated with incidental and consequential damages and are excluded under this warranty, regardless of when, where or why the warranty occurs
All EVO Manufacturing products must be deemed to be installed correctly, unaltered, free from abuse and combined with other appropriate equipment/products/components.
All return/warranty products must be recieved in new, unused, unmodified, undamaged condition to qualify for credit.
Exceptions to stated warranty:
Wearable items are not included in warranty. These products include but are not limited to tie rod ends, draglinks, bushings, bump stops, bearings, heim joints, uniballs/spherical bearings etc. and hardware
Any substitution of other manufactures components or exemption of required and or supplied components will immediately void all warranties.
EVO Manufacturing does not warranty any product not manufactured by EVO Manufacturing.
EVO Manufacturing warranty applies to only products purchased, sold, installed and remaining in the United States of America.
All product finishes provided are warranted to be free from defects at time of sale only.
Springs and Shocks are warrantied against manufacturing defects only and are only returnable if they have not been installed on a vehicle.
EVO Manufacturing products that are used for competition and or racing immediately void all warranties.
EVO Manufacturing recommends the installation of EVO MFG products be installed by certified technicians only.
EVO Manufacturing is not responsible or liable for any loss, damage, injury whether consequential, ordinary, direct, special or incidental arising from the manufacture, sale, resale, installation, delivery, possession, handling and or use of its products.
Electronic components and products provided by EVO MFG will have a 90 Day Warranty and must be deemed free if any tampering or accidental damages or abuse.
EVO Manufacturing is not responsible for any typographical errors in either pricing or content related to all EVO Manufacturing related products, items, websites, packaging, instructions etc.
Disclaimers:
Warranties: EVO Mfg. disclaims any other warranties, whether express or implied, beyond those set out in the above-entitled “Warranties” provision. Warranties specifically disclaimed include but are not limited to any implied warranties, any warranty of suitability, any warranty of merchantability, or any warranty of fitness for a particular purpose.
Consequential Damages: EVO Mfg. will not be responsible for damages resulting in negligence, alteration, accident or use for which the part was not approved by the manufacturer or EVO. EVO will not be responsible for loss time, inconvenience, loss of use of a vehicle or any other consequential damages, or labor for removal from the vehicle and reinstallation (if any) or any part or merchandise.
Shipping:
We ship our parts anywhere in the world. Due to varying shipping rates, taxes and duties we require all orders to be placed through email (sales@evomfg.com) or phone calls (310.761.9588) to better assist you, the customer, in receiving the most accurate and cheapest shipping rates.
Please allow one business day for order processing. The majority of orders are shipped immediately if your item is in stock and available. You will receive an email notification within 2 business days, notifying you that your item(s) has shipped. If your item is currently not in stock, it will have to be made to order which may take up to 8 weeks. In such instances you will be contacted via email by Customer Service.
Please note because we are located in Southern California all orders shipping to locations within Southern California usually arrive the next business day via Fedex or UPS Ground.
For orders shipping outside the US, please email sales@evomfg.com for shipping options.
Damaged or Missing Items:
Please verify that all contents shown on the bill of materials located on the instructions are free from damage or defects.
EVO MFG will not be held resposible for missing or damaged items caused by shipping or packaging.
EVO MFG must be notified if you have missing or damaged items within 7 days after delivery date. Contact 310.761.9588
FITMENT VERIFICATION:
All raw products should be checked for defects and for proper fitment prioir to powdercoating or painting. Incorrect items or defects must be brought to the attention of EVO MFG prior to powdercoating or painting.
EVO MFG is not responsible for cost associated with powdercoating or painting of parts that were not previously verified.
Sales Tax
For all orders shipped within California, there will be an 8.00% sales tax automatically calculated and added to your order total at time of checkout. Orders shipping to all other states will be exempt from sales tax.
Cancelling or Changing Orders
Orders can not be cancelled once you have completed the checkout process. However, we will do our best to accommodate you if you need to make any changes. Please contact Customer Service as soon as possible.
