JK JKU EVO 3-5 INCH LIFT DOUBLE THROW DOWN KING COILOVER BYPASS CANTILEVER HIGH CLEARANCE LONG ARM ( AFTER MARKET AXLE ) SUSPENSION JEEP WRANGLER

EVO MFG
EVO-204-60
$14,493.31
$14,493.31

JEEP Wrangler JK EVO Double Throw Down

EVO SPEC KING Coilover Bypass Shocks

EVO MFG JK Front King Coilover and Bypass Double Throw Down Long Arm Suspension
Front:
EVO Double Throw Down System is engineered for the guys who like to go fast. This system utilizes a coilover similar to our EVO SPEC Front Bolt on Coilover system and has the same added benefits, as well as an additional bypass shock each corner. With the addition of a bypass shock you have full external adjustability of the damping and “zones” within the shock stroke that allow the system to be position sensitive. This system gives your suspension up to 14" of vertical wheel travel specifically tuned for the Jeep JK.

Coilover/Bypass shocks (Comes complete with EVO SPEC King Shocks)

All bracketry made from laser cut 3/16” steel and CNC bent for optimum precision

Adjustable ride height without the need for changing parts

Engineered and tested to pair with the EVO Rear Double ThrowDown

Compatible with 2007+ Jeep Wrangler JK (2 and 4-door models)

This Complete system uses: 2.0 Diameter EVO Spec Remote Reservoir Coilover by King Shocks 2.5″ Diameter EVO Spec Remote Reservoir by King Shocks 3-Tube Bypass

All shocks purchased with our kit come with EVO Spec Proprietary Spring Rates and Valving.

Notes:

High Clearance Fenders Recommended

Front Aftermarket CV Driveline is required for proper installation and is not included with kit.

Wheel backspacing adjustments may be required. Due to so many variations and combinations of ACTUAL tire sizes, wheel widths, tire inflation presures etc.

INSTALLATION TIME 8-10 HOURS

Rear:
JK Rear Double ThrowDown EVOLever System (W/ Coilover & Bypass)

The rear EVO Double ThrowDown System is engineered for the guys who like to go fast. This system utilizes a coilover just like our EVOLever and has all the same added benefits, aswell as an additional bypass shock each corner. With the addition of a bypass shock you have full external adjustability of the damping and “zones” within the shock stroke that allow the system to be position sensitive. This system gives you 14″ of positions sensitive damping without the need for cutting holes in the body of your Jeep.

Fits all Jeep Wrangler’s 07+

2 Door and 4 Door

Allows the uses of long travel coilover and external bypass shocks in the rear of your JK without the need for doing any major cutting. Absolutely no cutting of the body.

Offers up to 14” of vertical wheel travel.

Optimizes Long Arm suspension system, from every manufacturer without modification.

Offers the maximum amount of ground clearence with 14″ travel.

All key components fully protected and above axle at all times.

Adjustable ride height

Four Ply limit straps included.

¾ inch chromoly heim joints.

Stainless steel misalignments

Grade 8 hardware

Allows for use of 35” up to 42” tires (Larger than 37: Body Trimming required).

Notes:

High Clearance Fenders Recommended

Exhaust modifications required

EVO Manufacturing is now shipping the rear Double Throw Down sub frames with the bushing and pivot points preassembled and lubricated .This simple process will help ease the install and insure proper set up of the pivot points. Now the installer will be able to install this product faster which means you can enjoy all these great benefits sooner.

INSTALLATION TIME 8-10 HOURS


The EVO MFG High Clearance PRO Long Arm Upgrade kit
features the EVO MFG Adjustors, full on car adjustability of control arm length, proven Currie Johnny Joints are used on both ends of each arm, rebuildable, greaseable, and isolated construction for decreased transmission of road vibrations, the ability to retain the factory high clearance transmission cross-member, (welding required)

Notes:

High Clearance Fenders Recommended. Suspension system fits all year and model Jeep Wrangler JK/JKUs

2Door JK: Front (or exhuast spacer kit) and rear aftermarket driveshaft required. (not included)

4Door JKU: Front aftermarket driveshaft or exhaust spacer required, rear driveshaft recommended. (not included)

Recommended wheel backspacing 3.75” or less (smaller backspacing #). Exhaust modifactions required on 2010+ JK/JKUs




INSTALLATION TIME 34-48 HOURS






WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.







Read More
Read Less

This product uses the following installation instructions.

EVO-1108.pdf

EVO-1109.pdf

EVO-1085.pdf

EVO-1071.pdf

All Products Manufactured by EVO Manufacturing shall have a Limited Lifetime Warranty on defects in material and craftsmanship.

All products must be on the original vehicle it was installed on by the original purchaser and is not transferable

Proof of purchase is required for all warranty claims

EVO Manufacturing is not responsible for any labor charges, shipping charges and other costs in result of a warranty claim of any EVO Manufacturing product

EVO Manufacturing is not responsible for any and all costs associated with incidental and consequential damages and are excluded under this warranty, regardless of when, where or why the warranty occurs

All EVO Manufacturing products must be deemed to be installed correctly, unaltered, free from abuse and combined with other appropriate equipment/products/components.

All return/warranty products must be recieved in new, unused, unmodified, undamaged condition to qualify for credit. 

Exceptions to stated warranty:

Wearable items are not included in warranty.  These products include but are not limited to tie rod ends, draglinks, bushings, bump stops, bearings, heim joints, uniballs/spherical bearings etc. and hardware

Any substitution of other manufactures components or exemption of required and or supplied components will immediately void all warranties.

EVO Manufacturing does not warranty any product not manufactured by EVO Manufacturing.

EVO Manufacturing warranty applies to only products purchased, sold, installed and remaining in the United States of America.

All product finishes provided are warranted to be free from defects at time of sale only.

Springs and Shocks are warrantied against manufacturing defects only and are only returnable if they have not been installed on a vehicle.

EVO Manufacturing products that are used for competition and or racing immediately void all warranties.

EVO Manufacturing recommends the installation of EVO MFG products be installed by certified technicians only.

EVO Manufacturing is not responsible or liable for any loss, damage, injury whether consequential, ordinary, direct, special or incidental arising from the manufacture, sale, resale, installation, delivery, possession, handling and or use of its products.

Electronic components and products provided by EVO MFG will have a 90 Day Warranty and must be deemed free if any tampering or accidental damages or abuse.

EVO Manufacturing is not responsible for any typographical errors in either pricing or content related to all EVO Manufacturing related products, items, websites, packaging, instructions etc.

 

Disclaimers:

Warranties: EVO Mfg. disclaims any other warranties, whether express or implied, beyond those set out in the above-entitled “Warranties” provision. Warranties specifically disclaimed include but are not limited to any implied warranties, any warranty of suitability, any warranty of merchantability, or any warranty of fitness for a particular purpose.

Consequential Damages: EVO Mfg. will not be responsible for damages resulting in negligence, alteration, accident or use for which the part was not approved by the manufacturer or EVO. EVO will not be responsible for loss time, inconvenience, loss of use of a vehicle or any other consequential damages, or labor for removal from the vehicle and reinstallation (if any) or any part or merchandise.

 

Shipping:

We ship our parts anywhere in the world.  Due to varying shipping rates, taxes and duties we require all orders to be placed through email (sales@evomfg.com) or phone calls (310.761.9588) to better assist you, the customer, in receiving the most accurate and cheapest shipping rates.  

Please allow one business day for order processing. The majority of orders are shipped immediately if your item is in stock and available. You will receive an email notification within 2 business days, notifying you that your item(s) has shipped. If your item is currently not in stock, it will have to be made to order which may take up to 8 weeks. In such instances you will be contacted via email by Customer Service. 

Terms of sale: All products shipped FOB EVO MFG and the buyer assumes all risk of damage or loss.
Insurance is available through the carrier at an additional charge. Signature required is available upon request.

Please note because we are located in Southern California all orders shipping to locations within Southern California usually arrive the next business day via Fedex or UPS Ground.

For orders shipping outside the US, please email sales@evomfg.com for shipping options.

Damaged or Missing Items:  


Please verify that all contents shown on the bill of materials located on the instructions are free from damage or defects.

EVO MFG will not be held resposible for missing or damaged items caused by shipping or packaging.

EVO MFG must be notified if you have missing or damaged items within 7 days after delivery date. Contact 310.761.9588

FITMENT VERIFICATION:

All raw products should be checked for defects and for proper fitment prioir to powdercoating or painting. Incorrect items or defects must be brought to the attention of EVO MFG prior to powdercoating or painting.

EVO MFG is not responsible for cost associated with powdercoating or painting of parts that were not previously verified.  

Sales Tax
For all orders shipped within California, there will be an 8.00% sales tax automatically calculated and added to your order total at time of checkout. Orders shipping to all other states will be exempt from sales tax.

Cancelling or Changing Orders
Orders can not be cancelled once you have completed the checkout process. However, we will do our best to accommodate you if you need to make any changes. Please contact Customer Service as soon as possible.

Your cart

×